Twitter| Business Type | Manufacturer, Exporter, Supplier, Retailer, Wholesaler |
| Type | Respirable Dust Sampler |
| Weight | 30 Kg |
| Voltage | 220V |
| Click to view more | |
Preferred Buyer From
| Location | Worldwide |
Product Details
Condition
New
Features
Durable, Eco Friwndly, Fine Finished, Precise Design
Warranty
ALL VAIBHAV PRODUCTS CARRY 14 MONTH WARRANTY
Display
Ananlog
Flow Rate
Free flow 0.9 – 1.4 m3/min free flow with filter and more than 2.0 m3/min without filter
Automation Grade
Manual
Brand Name
VAIBHAV
Power
AC
Basic features
Heavy duty brushless belt driven almost maintenance free & zero consumable blower
Particulate Sampling
D50 cutoff cyclonic separator separate 10micron down to 0.1micron(depending upon filter). A cyclone is used for fractionating dust into two fractions. RSPM(<10μm ) are accumulate on filter paper
Filter Holder
Fine finished power coated fabricated from aluminum casting having zero leakage / leak proof through rubber gasket at all joints to accommodate any standard filter paper of 20.3cm x 25.4cm
Filter Media
8” X 10” (203mm X 254mm / 20.3cm X 25.4 cm) Glass microfiber filter for common use and EPM2000 or equivalent for special monitoring / research work
IS Reference
Match the requirement prescribed in BIS 5182(Part-23) 2006 for particulate matter collection
Timer Recorder
0.00 to 99999.99 hrs. time totalizer records the running time in hours
Clock / Timer
Programmable Real Time control system with control of automatic start & stop, number of required intervals can be programmed, Timer is used to start and shut off the sampler at preset time
Sampling Time
As per user choice and upto 30 hours maximum for single operation
Power Requirement
Single phase AC 220 volts, 50 Hz, sampler unaffected by +/- 10 % fluctuation in supply voltage. For proper operation and safety a good earth connection is mandatory
Dimension
Approximately 410mm X 300mm X 700mm
Particle Size
Separate provision for collection of Respirable and non Respirable (less than and greater than 10 micron) size particles
Construction
The body of RDS is robust enough to withstand impacts and vibration in transportation, it is made of heavy aluminum sheet.
Night View
Provision has been made for light in the sampler for taking reading during dark area and in night hours
Hardware
Only SS 304 corrosion free hardware are used in sampler for assembling
Make
VAIBHAV EQUIPMENT SERVICE – AHMEDABAD
Product Code
VRDS 500
Port
EX WORK AHMEDABAD
Payment Terms
L/C, D/P, T/T
Delivery Time
READY STOCK
special features
modular design for easy operation
drain plug for manometer fluid leveling
sturdy aluminum construction with ss hardware
low noise during operations
less variation in flow even chocking of filter
maintenance free suction assembly
totally eliminated of emi
compact, portable, easy to operate-transport & handle
arrangement for parallel gaseous sampling
light provision for working in night & dark area
design to runs continuously 24 hours or more
common body (housing) structure for all the model which will easy converted to any of the below model
suitable for outdoor use, corrosion free lockable housing
.
Looking for "Respirable Dust Sampler - Model No. - VRDS 500" ?
Set(s)
